Nstallation & Support

- Simple structure — buyers can self-install with our English manual, operation video and free online engineer support, if you prefer, we could also provide on site service at customer’s expense.
- Wear parts (blades, belts, kerf plates) kept in stock; ~60-80 blades/year at full daily load
- CE certified · ISO9001 · 1-year warranty (excl. blades & belts)
- 10-15 year service life · lifetime remote support
- Flexible payment: T/T 30% deposit · LC at sight · SINOSURE supported

SF8003 / SF8005 MULTI-HEAD TRIM CUTTING SAW & STACKER — ±0.5 mm Accuracy · Up to 5 Saw Heads · One-Pass Multi-Cut

Trim and cut multiple board lengths in a single pass — accurate, fast, and automatic stacking — for pallet and solid-wood production.

Up to 5 saw heads · ±0.5 mm cutting accuracy · 450 mm 120T blades · SKF spindle bearings · Delta inverter feeding · integrated stacker.

- ±0.5 mm cutting accuracy — repeatable, spec-true lengths
- Up to 5 saw heads cut multiple lengths in one pass
- Feed up to 5,000 mm; infeed 20 m/min, outfeed 60 m/min
- SKF spindle bearings + 120T carbide blades
- Integrated stacking — cut-to-stack in one line

[ Request Customized Quotation ]

Voltage Compatibility

Standard 380V/50Hz/3-phase, Custom Voltage, such as 400v/415v 50Hz, 220v/480v 60Hz as per your local power supply. Pneumatics are AirTac, with SMC or Festo upgrade available on request.

Proven in Demanding Markets

Delivered to pallet and timber producers in Canada, Australia and Mexico — field-proven across diverse climates, power grids and timber conditions.

Multi-head trimming cuts multiple precise lengths in a single pass with ±0.5 mm accuracy — boosting throughput and lumber yield while feeding consistent boards

What this means for you:

- Cut multiple lengths in one pass — higher throughput
- ±0.5 mm accuracy — consistent boards, less downstream rework
- Cut-to-stack in one line — lower labour
- SKF bearings + heavy frame — built to last

We don't publish equipment prices because configuration affects final cost. Customized quotation within 24 hours.

[ Request Customized ROI Quotation ]

SEE IT CUT YOUR TIMBER — BEFORE YOU BUY

Send us your board specs and target lengths, and we'll run a test cut on the SF8005 and send you the video.

- Free test-cutting video service
- Your exact lengths and section sizes
- See cut quality and ±0.5 mm accuracy before you commit

[ Request a Test Cut ]

- MULTI-HEAD ONE-PASS CUTTING: Up to 5 saw heads cut a board into multiple precise lengths in a single pass — far faster than single-blade trimming, with adjustable head spacing.
- ±0.5 mm ACCURACY: SKF-bearing spindles and 450 mm 120-tooth carbide blades deliver clean, ±0.5 mm cuts — consistent lengths for downstream pallet assembly.
- INVERTER FEED & FAST OUTFEED: Delta inverter feeding (infeed 20 m/min, outfeed 60 m/min) keeps the line flowing with minimal handling.
- INTEGRATED STACKING: A built-in stacker collects cut boards automatically — a complete cut-to-stack workflow in one line.
- LOW-COST CONSUMABLES: Standard wear parts (blades, belts, kerf plates) are kept in stock; ~60-80 blades/year at full daily load.
- CONFIGURED FOR YOUR MARKET: Custom Voltage, such as 380v/400v/415v 50Hz, 220v/480v 60Hz; pneumatics AirTac with SMC/Festo upgrade available.

Q: What's the difference between SF8003 and SF8005?

A: SF8003 has 3 saw heads (16.5 kW sawing, 5,600 kg, feed to 3,000 mm); SF8005 has 5 saw heads (27.5 kW, 8,800 kg, feed to 5,000 mm) for higher output and longer material.

Q: How accurate is the cut?

A: ±0.5 mm, on SKF-bearing spindles with 450 mm 120-tooth carbide blades.

Q: How many lengths can it cut at once?

A: Up to 5 lengths in a single pass on the SF8005 (3 on the SF8003), with adjustable head spacing.

Q: How fast is it?

A: Inverter-controlled feeding — infeed up to 20 m/min, outfeed up to 60 m/min.

Q: Does it stack the boards?

A: Yes — an integrated stacker collects cut boards automatically.

Q: What voltage does it use?

A: Standard 380V/50Hz, Custom Voltage, such as 400v/415v 50Hz, 220v/480v 60Hz as per your local power supply.

Q: How often are blades replaced?

A: About 60-80 blades/year at full daily load; blades and belts are consumables kept in stock.

Q: Can I see it cut before ordering?

A: Yes — send your specs for a free test-cutting video.

Q: What's the delivery time?

A: 2-4 months depending on configuration.

Q: What payment terms do you accept?

A: 30% T/T deposit, LC at sight, and SINOSURE export credit insurance.