1. Equipment Installation and Operational Requirements This equipment features high performance and advanced manufacturing processes. Operators must read this manual thoroughly before use to understand the functions and roles of each component. This...
Read More
1. Manual Control Interface 1）Pre-spraying Delay: The time required for the pallet to travel from the feed sensor to the spray gun position. 2）Spraying Duration: The time required for the pallet to pass through the spray zone. 3）Circulation Pump R...
Read More
1.Standard Operating, Commissioning, and Maintenance Procedures This equipment is engineered with superior performance and advanced technology. To ensure maximum utilization and operational safety across various working environments, it is mandatory ...
Read More
1.Machine Transport When handling with a forklift, ensure sufficient load capacity. Fork width must match the machine base; forks must extend beyond the body. Avoid surface damage or base impact. 2.Installation of the Machine 1) Mechanical Str...
Read More
Figure 1.1 Complete Machine Image Power Wiring Use 4mm2+ cable for three-phase 480V/60Hz + ground (Figure 2.1). Figure 2.1 Power Wiring Connecting to Air Source Connect air source via F8 pipe; adjust pressure to 0.5-0.7 MPa (Figure 2.2). Figure 2....
Read More
1.1 Startup Interface Figure 1.1 Figure 1.2 1.2.1 System Management Figure 1.3 appears. Figure 1.3 Figure 1.4 Click Database Management, as shown in Figure 1.4. In the File Name field, enter the format: [database name to ...
Read More
Adjustment and Maintenance of the Equipment Power off and stop the machine before adjustment or maintenance. (Note: The machine must be stopped) 1.1 Adjustment of Processing Specifications The equipment must be adjusted when changing to different b...
Read More
<br> Introduction: There are many types of wooden pallet nailing equipment. More than 95% of them use pneumatic nail gun nailing systems. Although this type of equipment has a relatively low cost, it has a high nail missing rate and require...
Read More
1. Adjustment of Processing Specifications To prevent damage to accessories or malfunctions during the adjustment process, be sure to follow this adjustment sequence. Sequence when increasing specifications: Alignment plate width → Baffle plate...
Read More
Need to safely commission or operate your SF6060 machine tool? Get step-by-step setup, safety protocols, HMI navigation, and mode configuration. Download the official guide now.
Read More
Avoid costly delays: Get SF9026 pallet line pre-installation right—electrical grounding, aviation plug wiring, compressed air specs (0.7–0.8 MPa), and leveling tips. Download checklist now.
Read More
Struggling with misaligned nailing on your 9026X pallet machine? This step-by-step guide ensures precise mold & nail gun positioning for zero interference. Optimize accuracy now.
Read More
Hot News2025-04-17
2025-06-06
Copyright © 2025 SHANDONG HICAS MACHINERY (GROUP) CO., LTD.
